- 品牌/商標：青島漢泰
- 企業(yè)類型：制造商
- 新舊程度：全新
- 原產地：青島
全隔離手持示波表，示波器通道間完全隔離，示波器和萬用表通道隔離，示波器、萬用表與USB等通訊接口之間完全隔離，60MHz-200MHz 帶寬,1GSa/s 實時采樣率,2M 存儲深度, 6000 計數萬用表.5.6 吋大屏幕彩色液晶顯示，高分辨率(640*480）
Model | TDS1202S | TDS1122S | TDS1062S |
Oscilloscope mode | |||
Bandwidth | 200MHz | 120MHz | 60MHz |
Real-time Sample Rate | 1GSa/s | ||
Equivalent Sample Rate | 25GSa/s | ||
SEC/DIV Range | 2nS/div-2000S/div (in a 2, 4, 8 sequence) | ||
Delay Time Accuracy | 500ps | ||
Vertical | |||
A/D Converter | 8-bit resolution | ||
VOLTS/DIV Range | 2mV/div～5V/div at input BNC | ||
Position Range | ±50V(5V/div),±40V(2V/div～500mV/div), ±2V(200mV/div～50mV/div)±400mV(20mV/div～2mV/div) | ||
Record Length | Single-channel: Maximum 2M; Dual-channel:Maximum 1M | ||
Trigger | |||
Trigger Sensitivity | DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full | ||
Trigger Level Range | CH1,CH2: ±8 divisions from center of screen | ||
Trigger Level Accuracy, | CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen) | ||
Holdoff Range | 100ns-10s | ||
Trigger Type | |||
Edge | Trigger on the rising or falling edge | ||
Pulse Width | Trigger (when >,<,=,≠) on positive or negative pulses | ||
Video | Trigger on an NTSC, PAL, or SECAM standard video signal | ||
Slope | Trigger (when >,<,=,≠) on a positive or negative slope | ||
Overtime | from the rising or falling edge | ||
Alternate | Internal trigger on edge, pulse width, video or slope | ||
Measurement | |||
Cursors | Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz. | ||
Automatic | Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width | ||
Meter Mode | |||
Max.Resolution | 6,000 Counts | ||
DMM Testing Modes | Voltage, Current, Resistance, Capacitance,Diode & Continuity | ||
Max. Input Voltage | AC: 600V, DC: 800V | ||
Max. Input Current | AC: 10A, DC: 10A | ||
Input Impedance | 10 MΩ | ||
Isolation | |||
