上海卓峙自動化設備有限公司是一家從事工業(yè)自動化工程設計、安裝、調試、售后服務和代理銷售各類電氣，服務于一體的企業(yè)。公司堅持“信譽為本，誠信經營”的理念，依靠網絡從事世界傳感器，柵、隔離柵，電源，低壓電器以及氣動液壓,儀器儀表,機電產品銷售與工程配套服務，公司為冶金、石油、化工、鋼鐵、電力、電子、船舶、汽車、、紡織、食品、、制藥、包裝、等眾多行業(yè)提供完善的技術方案和備件服務。
銷售：德國福(P+F)，英國MTL柵，德國圖爾克(TURCK)，德國施克(SICK)，德國菲尼克斯(PHOENIX)，邦納(BANNER)，日本CKD，德國易福門(IFM)等，全系列柵，電源，模塊，傳感器，編碼器，端子繼電器等，公司備有大量庫存，另為客戶提供偏門冷門的歐州產品。
聯(lián)系人：徐工
電話：
| General specifications | ||
| Signal te | Dial Input | |
| Supply | ||
| Conneion | Power Rail or terminals 14+, 15- | |
| Rated voltage | 20 ... 30 V DC | |
| Ripple | ≤ 10 % | |
| Rated current | ≤ 50 mA | |
| Power loss | 1 W | |
| Power consumption | < 1.3 W | |
| Input | ||
| Conneion | terminals 1+, 2+, 3- | |
| Rated values | acc. to EN 60947-5-6 (NAMUR) | |
| Open circuit voltage/short-circuit current | approx. 8 V DC / approx. 8 mA | |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA | |
| Line fault deteion | breakage I ≤ 0.1 mA , short-circuit I > 6 mA | |
| Pulse/Pause ratio | min. 20 ms / min. 20 ms | |
| Output | ||
| Conneion | output I: terminals 7, 8, 9 ; output II: terminals 10, 11, 12 | |
| Output I | signal ; relay | |
| Output II | signal or error message ; relay | |
| Conta loading | 253 V AC/2 A/cos φ > 0.7; 126.5 V AC/4 A/cos φ > 0.7; 40 V DC/2 A resistive load | |
| Minimum switch current | 2 mA / 24 V DC | |
| Energized/De-energized delay | approx. 20 ms / approx. 20 ms | |
| Mechanical life | 107 switching cycles | |
| Transfer charaeristics | ||
| Switching frequency | ≤ 10 Hz | |
| Direive conformity | ||
| Eleromagnetic compatibility | ||
| Direive 2004/108/EC | EN 61326-1:2006 | |
| Low voltage | ||
| Direive 2006/95/EC | EN 61010-1:2010 | |
| Conformity | ||
| Eleromagnetic compatibility | NE 21:2006 | |
| Proteion degree | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Proteion degree | IP20 | |
| M | approx. 150 g | |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 in) , housing te B2 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Data for application in conneion with Ex-areas | ||
| EC-Te Examination Certificate | PTB 00 ATEX 2080 , for additional certificates see www.pepperl-fuchs.com | |
| Group, category, te of proteion | II (1) G [Ex ia] IIC, II (1) D [Ex ia] IIIC | |
| Error message output | ||
| Maximum safe voltage | 40 V DC (Attention! Um is no rated voltage.) | |
| Statement of conformity | PF 08 CERT 0803 | |
| Group, category, te of proteion | II (3)G [Ex ic Gc] IIC | |
| Statement of conformity | TüV 99 ATEX 1493 X , observe statement of conformity | |
| Group, category, te of proteion, temperature cl | II 3G Ex nA nC IIC T4 | |
| Direive conformity | ||
| Direive 94/9/EC | EN 60079-0:2009, EN 60079-11:2007 , EN 60079-15:2005 , EN 61241-11:2006 | |
| International approvals | ||
| FM approval | ||
| Control drawing | 116-0035 | |
| CSA approval | ||
| Control drawing | 116-0047 | |
| IECEx approval | IECEx PTB 11.0034 | |
| Approved for | [Ex ia] IIC , [Ex ia] IIIC , [Ex ia] I | |
