智能蓄電池充電機
（充電＋在線監測）
Intelligent battery charger
Charge +on-line monitor
智能蓄電池充電機集充電、在線監測于一體，是對蓄電池組進行充電和容量檢測，深度放電后對電池補充充電及對電池組日常維護，新電池組工程驗收的備儀器。采用智能三階段充電模式，充電速度快，充電還原效率高，可以實現均充/浮充、恒流/恒壓自動轉換功能。可設定并顯示電壓、電流、時間、容量等參數，自動完成蓄電池組各種參數的測試、監控、顯示、記錄。充電完畢，檢測的數據可現場轉存至U盤或通過RS232接口直接上傳至PC機；配套的數據處理軟件對充電數據信息進行處理，并生成各種圖表，為分析電池性能提供科學的依據。
Integrating charge and on-line monitor in one, Intelligent battery charger is the essential instrument that can charge, test capacity to battery, boost charge and daily maintain to battery after deeply discharging and accept to new battery pack。It is adopted intelligent three-phase charge model, and can achieve the function of charging quickly, high charge reproduction efficiency and automatic conversion of constant-current to constant voltage. Parameters of voltage, current, time and capacity can be set and displayed. The machine can automatically achieve testing, monitoring, displaying and recording to the parameter of storage battery pack. After charging, test data can be transferred to U disk or upload to PC with RS232 interface. Data process software kit can process charge data information and form all kinds of charts, which provide scientific basis for yzing battery capability.
主要特點
l 技術：整機采用開關電源技術、智能充電技術，性高，對波動適應。
l 穩定性高：開關電源控制芯片采用級集成電路，穩定，延長電池的壽命；強制風冷式散熱，負荷自動均分，故障率低，性高。
l 采用脈寬調制技術，率，高功率因數；紋波系數低，對其它設備干擾小。
l 充電特性：采用智能充電技術，充電過程無須人工干預。嚴格按照蓄電池充電特性曲線進行充電，采用“恒流→恒壓限流→涓流浮充”智能三階段充電模式，使每節電池夠較快地充分地充滿電，避免過充電，做到全自動工作狀態，無需人工值守。
l 適用電池范圍廣：充電電流可在10%-額定值內任意設定，且不受輸入交流電壓變化的影響，在恒流充電期間電流維持不變，無需人為再調整。
Main Features
l Advanced technology: We adopt switch power supply technology and intelligent charge technology for the complete machine. It has high reliability and adaptability to network fluctuation.
l High stability: Controlled chip of switch power is stable and reliable, can extend battery life that is adopted import military standard IC. Forced air cooling, load automatic shared, low fault rate and high reliability.
l We adopt pulse duration modulation technology for the machine. It has high efficiency, high power factor, low ripple factor and low disturbance to other equipments.
l Charge feature: We adopt intelligent charge technology for the machine. Its charge process is not need manual intervention. Charge strictly according to the curve of battery charge, and make every sector battery full due to adopting the three-phase charge mode of constant current →fixed voltage & reducing current → floating charge
l Applied battery range is wide: charge current can be set between 10% to rating, can't be influenced by the change of input current and voltage, keep constant in the process of constant charge and no need hand adjustment.
主要功能
l 智能化程度高:大屏幕LCD液晶顯示，鍵盤設置，單片機控制，全中文菜單提示，界面友好，操作簡單。實時在線巡回檢測整組電池電壓，可設定電壓、電流、時間、容量等參數，自動完成對蓄電池組的充電。
l 智能三階段充電模式：充電初期采用恒流技術，使充電電流恒定，避免損壞電池，加速電池的老化；充電電壓上限電壓時自動轉換為恒壓限流充電，的了蓄電池的容量轉換效率；涓流浮充使各單體電池均衡受電，電池容量得以限度恢復，單體電壓不均衡現象，避免了市電電壓的變化和蓄電池充電的末期造成的蓄電池過壓充電的危險，大大延長了蓄電池的使用壽命。
l 掉電記憶功能：掉電后測試數據不丟失，重新加電后無須設定參數和狀態，可繼續充電。
l 自動停機功能：可設定電池組保護電壓、充電容量、充電時長等參數，在下列條件任意一條滿足時自動停止充電：電壓到、容量到、時間到。
l 完善的保護和報警功能：可通過設定整組電池的保護電壓、充電容量、充電時長等參數而實現自動保護及報警功能。
l 電壓、電流顯示值的校準修正功能。
數據轉貯和處理功能：充電結束后，采集的數據可經U盤轉存或經RS232接口直接上傳計算機，經配套的數據處
理軟件后臺處理后，可自動生成各種圖表，為判別整組電池的優劣提供了科學的依據。
Main functions
l High intelligence level: Test data can be displayed with big LCD, set with keyboard, referred with Chinese (English) menu. It’s controlled by SCM. It’s of friendly interface and operation simple. It can test battery voltage of whole set On-line real time, set voltage, current, time and capacity and achieve charging automatic to battery set.
l Intelligent three-phase charge mode: We adopt constant current technology at the beginning of charge, which can made current invariable and avoid battery broken or accelerating battery aging. It can convert to constant- voltage and current-limiting charge when charge voltage achieves upper limit voltage, which can improve effectively the capacity conversion efficiency of battery. Trickle and floating charge make each single cell battery constant receive electricity and ensure battery capacity can be recall most, which solved the unbalanced phenomenon of single cell battery and avoid the danger of voltage change and the end of battery charge, extend battery life.
l Power failure memory function: After power failure, all test data can’t lost. It needn’t set parameter and estate and can charge continuous after repower-on.
l Automatic s function: Protection voltage, charge capacity and charge time of battery can be set. It can s charging/discharging when meet following conditions: time out, capacity arrival , protection voltage arrival
l Perfect protection and alarm function: It can achieve automatic protection and alarm function with setting protection voltage, charge capacity and charge time of whole battery.
l The function of voltage and current value correction.
l Data store and process function: After charging, collected data can be transferred to U disk or upload to PC with RS232 interface, form all kinds of chart automatic after processing with data process software kit. It can provide scientific basis for adjusting whole battery capability.
數據處理軟件
配套的數據處理軟件可對充電數據資料進行處理，可查看實時曲線、實時監控數據，顯示、預覽、打印電壓和電流變化曲線、檢測數據報表等，給檢測人員提供判斷電池組優劣的依據。
Data processing software
Data processing software kit can process charge data. We can see examine real time curve and monitor data. Change curve of voltage and current and test data chart cab be displayed, previewed, printed. It can provide the battery basis that can adjust battery performance for tester.
技術參數
型號 | ZCD48-100 | ZCD220-35 | ZCD600-30 |
輸出電壓 | 0～48V×125% | 0～220V×125% | 180～600V×125% |
電流調節范圍 | 10～100A | 3～35A | 3～30A |
電流調節細度 | 0.1A | ||
電流控制 | ±1% | ||
總電壓測量 | ±1% | ||
定時器 | 0～99小時59分鐘 | ||
工作電源 | 交流單相220V或三相380V | ||
效率 | ≥0.85 | ||
緣強度 | 輸入對外殼和對輸出≥1500V | ||
輸出對外殼≥500V | |||
平均無故障時間 | （MTBF）：≥50000h | ||
尺寸(mm) | 426×505×172 | 426×505×172 | 560×290×540 |
重量(kg) | 20 | 26 | 35 |
規格范圍：電壓2V–600V；電流 3A-1000A；可依需求選訂。
Technology parameter
Model | ZCD48-100 | ZCD220-35 | ZCD600-30 |
Output voltage | 0～48V×125% | 0～220V×125% | 180～600V×125% |
Current adjustment range | 10～100A | 3～35A | 3～30A |
Current adjustment fineness | 0.1A | ||
Current controlling precision | ±1% | ||
Total voltage controlling precision | ±1% | ||
Timer | 0～99 hours 59 minutes | ||
Operation power supply | AC single phase 220V or three-phase 380V | ||
Efficiency | ≥0.85 | ||
Isolation intensity | Input to crust and output≥1500V | ||
Output to crust≥500V | |||
MTTF | （MTBF）：≥50000h | ||
Dimension (mm) | 426×505×172 | 426×505×172 | 560×290×540 |
Weight(kg) | 20 | 26 | 35 |
Specification：voltage 2V–600V；current 3A-1000A.Parameter can be selected according to users’ order。
典型應用
電力、通信、鐵路、、航天、油田、金融等各行業及使用和生產UPS電源、直流屏和蓄電池組的用戶及廠家。
Tical application: The users of Power, communication, railway, army, spaceflight, oilfield, finance industry and factories of manufacturing UPS power supply, DC screen and battery set.