單相（直流）固態繼電器 （直流3-32VDC控制）
施耐德電氣集團有限公司（產地：香港）
規格分類 SSR-10DD SSR-60DD SSR-10DD-H SSR-60DD-H
Specifiction SSR-25DD SSR-80DD SSR-25DD-H SSR-80DD-H
clification SSR-40DD SSR-90DD SSR-40DD-H SSR-90DD-H
SSR-50DD SSR-100DD SSR-50DD-H SSR-100DD-H
外型尺寸 Outine Dimension(mm) 62.0L*44.0W*23.0H 62.0L*44.0W*23.0H
負載電壓 Load voltage 5-60VDC(基本型) （Basic model) 24-240VDC(高壓型） （High pressure te)
負載電流 Load Current 10A 25A 40A 50A 60A 80A 90A 100A
控制電壓 Control Voltage 3-32VDC 3-32VDC
控制電流 Control Current DC3-25mA DC3-25mA
通態壓降 On Voltage ≤1.5V ≤1.5V
斷態漏電流 Off leakage Current ≤2mA ≤2mA
斷態時間 On-off Time ≤10mS ≤10mS
介質耐壓 Dielectric Strength 2500VAC 2500VAC
緣電阻 Lnsulation Resistance 1000MΩ/500VDC 1000MΩ/500VDC
環境溫度 Ambient Temperature -30℃- +75℃ -30℃- +75℃
安置方式 Mounting methods 螺栓固定 Bolts fixed 螺栓固定 Bolts fixed
工作指示 The work instructions LED LED
重量 Weight 132g 132g
說明 Explanation 1.負載10A,須安裝散熱器,40A以上加風扇強冷或水冷
2.使用感性負載時,請務在輸出端并接一壓敏電阻,取值為負載電壓的1.6-1.9倍
1.10A ovryload:lt must install radiator:above 40A:it need cold fans or watre-cooling.2.when use emotional overload,please connect a emotional resistance in the export end,the v alue is 1.6-1.9times than overload voltage.
施耐德電氣集團有限公司（產地：香港）
規格分類 SSR-10DD SSR-60DD SSR-10DD-H SSR-60DD-H
Specifiction SSR-25DD SSR-80DD SSR-25DD-H SSR-80DD-H
clification SSR-40DD SSR-90DD SSR-40DD-H SSR-90DD-H
SSR-50DD SSR-100DD SSR-50DD-H SSR-100DD-H
外型尺寸 Outine Dimension(mm) 62.0L*44.0W*23.0H 62.0L*44.0W*23.0H
負載電壓 Load voltage 5-60VDC(基本型) （Basic model) 24-240VDC(高壓型） （High pressure te)
負載電流 Load Current 10A 25A 40A 50A 60A 80A 90A 100A
控制電壓 Control Voltage 3-32VDC 3-32VDC
控制電流 Control Current DC3-25mA DC3-25mA
通態壓降 On Voltage ≤1.5V ≤1.5V
斷態漏電流 Off leakage Current ≤2mA ≤2mA
斷態時間 On-off Time ≤10mS ≤10mS
介質耐壓 Dielectric Strength 2500VAC 2500VAC
緣電阻 Lnsulation Resistance 1000MΩ/500VDC 1000MΩ/500VDC
環境溫度 Ambient Temperature -30℃- +75℃ -30℃- +75℃
安置方式 Mounting methods 螺栓固定 Bolts fixed 螺栓固定 Bolts fixed
工作指示 The work instructions LED LED
重量 Weight 132g 132g
說明 Explanation 1.負載10A,須安裝散熱器,40A以上加風扇強冷或水冷
2.使用感性負載時,請務在輸出端并接一壓敏電阻,取值為負載電壓的1.6-1.9倍
1.10A ovryload:lt must install radiator:above 40A:it need cold fans or watre-cooling.2.when use emotional overload,please connect a emotional resistance in the export end,the v alue is 1.6-1.9times than overload voltage.
