可根據客戶要求定制，可OEM定制加工
全行業薄可移動MICRO充電器
 產品外觀設計新穎，制作工藝科學嚴謹精細

產品百滿負荷老化，性能穩定

1.1適用范圍(Application Range)

此規格書適用于ECH-AC/DC-4.2 /8.4 SERI數碼電池充電器的電氣、外觀、機械特性以及外部環境要求等方面的規格。

This specification appli to ECH-AC/DC-4.2 /8.4 SERI Dial camera/camcorder battery charger’s Electric, appearance , mechanical featur , external environment requirement and so on.

1.2更新記錄(update records)

2.產品特點

本充電器的外觀設計新穎、選用優質集成控制電路；制作工藝科學嚴謹精細、產品百滿負荷老化，性能穩定。The appearance of the machine is novel, quality Integrated circuits control; the production procs was precisens.；100% full load aging，reliable and stable。

3、環境條件(Environment conditions)

  本充電器于室內充電(this charger pecially use for indoor)

4、電氣特性(Electric characteristics)

4.1  交、直流輸入特性(AC/DC Input characteristics)

4.1.1         *AC Input：AC100V—AC240V，Frequency 50/60Hz;

4.1.2         DC Input:5V;

4.1.3         MAX. Inputcurrent :100mA

4.2輸出特性Output characteristics

4.2.1輸出電壓Output voltage：DC 4.25V&plun;0.05V8.4V&plun;0.05V

4.2.2輸出電流Output current：400mA&plun;50mA

4.2.3可充電池容量Rechargeable battery capacity：

300mA≤4.2V SERI≤6000mA600mA≤8.4V SERI≤10000mA

4.2.4指示功能Indication function：

4.2.4.1接通電源，空載狀態下（沒有待充電電池）充電器指示燈顯藍色。

When power-on and under light condition( no rechargeable battery),the indicator lamp of chargeris on blue

4.2.4.2將對應的待充電電池正確接入后，充電器指示燈顯紅色，也表明充電器正在給電池充電。

The indicator lamp of charger is on red, after inserting the proper rechargeable battery in the charger. That show the battery is charging

4.2.4.3當電池充至臨界飽和或充滿時充電器指示為藍色。當電池剛好充至臨界飽和（即剛轉為藍色）時再充30-60分鐘，此時電池處于飽和狀態。

The indicator lamp will be green when the battery is on critical saturation state or full. When the battery is just charging to the critical saturation (just switching green), at the moment, it will be better if you charge again for 30-60 minut.

4.3  充電控制方式Charge control mode

此充電器采用恒壓、恒流的方式充電。The charger charge with the mode of constant voltage and constant current

5、性測試Reliability tting

5.1 *高溫測試High temperature tting

實驗溫度為65℃&plun;2℃，產品不包裝，持續時間為5小時。在常溫下放置待恢復后對其外觀、緣強度、指示功能及電性能進行重新測試。外觀應平整無劃痕、毛刺以及其它機械損傷，外露金屬部分電鍍層不脫落無銹蝕；無擊穿、飛弧現象；指示功能及電性能正常

Experimental temperature is 65℃&plun;2℃, without package, duration is 5 hours.

Put it in the normal temperature .After recovering, we will tt it again to the appearance, insulation strength, indication function and electrical property.

The appearance should ooth, without scratch, burr and other mechanical damage. At the same time , the plating layer of exposed metallic part will not fall off and no rust ; without the phenomenon of breakdown and electric arcing; it is normal for the indication function and electrical property.

5.2*低溫測試*Low temperature tting

因條件的限制此功能暫未測試。As limited of the condition, this function is not tted temporarily.

5.3 *恒定濕熱測試Constant humid&heat tting

    實驗溫度為40℃&plun;2℃，濕度為90%～95%，產品不包裝，持續時間為48小時。測試后對其外觀、緣強度、指示功能及電性能進行重新測試。外觀應平整無劃痕、毛刺以及其它機械損傷，外露金屬部分的電鍍層不脫落無銹蝕；無擊穿、飛弧現象；指示功能及電性能正常。

Experimental temperature is 40℃&plun;2℃, the humidity is 90%～95%, without package, duration is 48 hours. After tting, we will tt it again to the appearance, insulation strength, indication function and electrical property.

The appearance should ooth, without scratch, burr and other mechanical damage. At the same time , the plating layer of exposed metallic part will not fall off and no rust ; without the phenomenon of breakdown and electric arcing; it is normal for the indication function and electrical property.

5.4*振動測試(Vibration tting)

頻率為10～55HZ，振幅為0.35mm，每個方向上掃頻循環次數為10次。實驗后對其外觀、緣強度、指示功能及電性能進行重新測試。外觀應無機械性損傷，外露金屬部分的電鍍層不脫落無銹蝕，

  指示功能及電性能正常。

Frequency is 10～55HZ,Amplitude is 0.35mm, each direction upward cycle for 10 tim. After experiments, re-tt its appearance, insulation intensity, indication functions and electricity performance. When appearance has not mechanical damage, the exposed metal parts’ plating layer no fall off and no rust corrosion, it shows normal for indirection function and electricity performance.

5.5跌落測試Falling tting

高度為1000mm，實驗臺厚度為20mm的硬木板，6個表面，每個方向1次。實驗后對其外觀、緣強度、指示功能及電性能進行重新測試。外觀應無機械性損傷，外露金屬部分的電鍍層不脫落無銹蝕，指示功能及電性能正常。

the height is 1000mm, experiment Dk is hard board of 20mm, 6 surface, one time for each direction, after experiment, re-tt its appearance, insulation intensity,

indication functions and electricity performance. When appearance has not mechanical damage, the exposed metal parts’ plating layer has not fall off and no rust corrosion it shows normal for indirection function and electricity performance.

6、外觀特性(Appearance characteristic)

6.1尺寸（主體）Measure: (main body)

   46.5*20*84.5mm

6.2重量(weight)

         30.0g

6.3外觀(appearance)

    本產品外殼表面無劃傷、批峰、污漬、裂縫，五金無生銹、批峰、劃傷。(Our products’ shell surface no scratch, fluous moulding shell ,bmirch, creve, the metals foil have no rust, fluous metal foils, scratch.)

7、充電器的使用操作指引(Using operation guidance of charger)

7.1本充電器適用于電壓，只要使用現場區域有對應usb端座口就可以跟此充電器匹配使用.(This charger is suitable for global voltage; it can choose the corrponding tip-plug according to users’ different regions that can be used to match))

7.2使用時操作手應握住沒有五金的部位usb端座口的。

Ensure the plug-in AC socket safety as the operator hold the parts without hardware.

7.3將選用與充電器相匹配的電池，并正確安裝在充電器上使之有良好的接觸，然后接入DC5V電源，充電器指示燈顯紅色為進入充電狀態。LED燈顯藍色有可能電池本身已飽和或沒有良好接觸，LED不亮有可能是DC接觸不良或充電器損壞。

Please use the matched battery with charger, and put the battery correctly into the charger, so that they touch well. Then, plug relevant DC power cord. When the light of charger indicat Red,

Means the charger charg the battery. LED light indicat blue, maybe the battery is full, or they couldn’t touch well. If LED light is no light, maybe the DC power cord couldn’t touch the charger well, or the charger is broken.

7.4在充電時充電器會有輕微發熱是正?，F(xiàn)象(因內部有發熱元器件)，所以為了電池充電有良好的充電效果，請將充電器放在通風，易于熱量散發的地方充電. When the charger is charging, there will be a little hot. It is normal situation /phenomenon, because, there are some hotting elements in it. Please locate the charger in the dry and airins place, so that the hot can be get out, and keep the charger well.

8、包裝/貯存PACKAGE & STOCK

8.1包裝Package

    包裝方式：紙盒The way of package: Color Box

8.2貯存Stock

充電器應貯存在環境溫度為-10℃～50℃，清潔、干燥通風的室內，應避免與腐蝕性特質接觸，應遠離火源及熱源。The charger should be stocked under the temperature -10℃～50℃, in the room of cleanns, dry & airins, don’t touch with the causticy goods , get away from fire and high temperature.

9、使用注意Instruction

9.1Warning

9.1.1此充電器是鋰離子電池的，與其它型號的電池配套使用有可能不充電或可能充壞電池且有可能會導致、電池破裂或漏液、人身傷害或財產損壞。It was exclusive used for Li-Ion batteri，batteri may not be charged or damaged when it match with other t of batteri，even cause explode，rupture and leak，personal injury or property damage。

9.1.2不正確使用充電器會有觸電的危險。If one couldn’t use charger correctly, he will be in the risk of touching electric.

9.1.3本充電器于室（車）內充電，請勿將其暴露于雨中或雪中。Don’t expose the charger in rain or snow. It is only used in room。

9.1.4請勿分解或組裝充電器。Don’t disemble or emble the charger by yourself!。

9.2  注意事項Notice

9.2.1請勿使充電器落地或?qū)⒅匚镏糜谄渖稀?/span>Don’t drop the charger or put the heavy thing onto it.

9.2.2兒童須成人的監督下使用本充電器。Make sure that the Adult take care of the little child when the child is using the charger.

9.2.3須在0℃～40℃溫度范圍內使用本充電器。Using this charger under temperature 0℃～40℃

9.2.4請勿在直射陽光下、發熱的設備旁或其它高溫場所使用或儲存本充電器。Don’t using or stock this charger under the direct sunshine, on the side of the hot equipment, or other hot plac

9.2.5在充電過程中，請勿用如毛巾、衣服之類的物品將充電器掩蓋，避免導致火警。Don’t put the charger under the towel, clothing, etc, avoiding the fire.

9.2.6在不使用充電器時，請將充電器內的電池取出，以免造成電池電量損耗。Please pick out the battery, when you don’t use the charger, lt the battery ullage.

10．產品外形圖：Charger featur.(產品外型以實物為準)