Tek 466
模擬存儲示波器，100MHz帶寬，雙蹤，衰減 5mV/div, 掃速 5-ns/div
此款示波器適合觀察非重復信號和緩慢移動的信號。
Features two modes of storage: Variable Persistence and Fast Transfer. Stored writing speed of 110 div/μsec. Sweep rate of 5 nsec/div with X10 magnifier. Four signal-output BNC connectors on the rear chamber changes to a te that improves shielding of the connected signal leads. The unit offers reduced scan mode in which the stored writing speed is 3000 div/μs.
技術指標
- Bandwidth: 100 MHz
- Number of Channels: 2 ch
- Min. Vertical Sensitivity: 5 mV/div
- Maximum Vertical Sensitivity: 5 V/div
- Vertical(or Deflection Factor) Accuracy: 3 %
- Input Coupling: AC,DC,GND
- Input Impedance: 1 MOhm
- Maximum Input Voltage: 250 V(dc+p)
- Main time base - lowest: 50 ns/div
- Main time base - highest: .5 s/div
- B Sweep Time Base (low): 50 ns/div
- B Sweep Time Base (high): 50 ms/div
- Time base Magnification factor (X?): x10
- Timebase accuracy: 2 %
- Trigger Source: External,Internal
- Trigger Sensitivity: 0.3 mV
- Display Te Color: CRT
- Display Size: 13 cm
- Trace writing speed (Analog Oscilloscope): 3 div/s
測量特性
- X/Y Mode
- Comm Mode Rejection
- Add Mode
- Inverted Trace Shift
- Chopped Mode
- Cascaded
- Trigger Jitter
- Level Control
- Trigger View
- Trace Separation
- Trigger Hold Off
- Differential Time
- Z Axis
- Channel 1 Output
選件
- Option 01 = Delete DM44 Temperature Probe
- Option 04 = Emc Modification
- Option 05 = TV Sync Separator (Provides triggering on TV field)
- Option 07 = Ext Dc Operation (not available with DM44)
- Option 10 = Third Channel Trigger View (Cannot be ordered with Option 05)
- Option DM44 = Built-in DMM
本公司經營模擬存儲示波器，質量，歡迎咨詢洽談。
