深圳市森東寶代理美國GGB全系列探針

以下是射頻探針 model 40A系列

購買須知：

     1、此款產品起拍量為一個

     2、購買前請一定要咨詢客服，詢問是否有足夠的庫存，直接拍下付款者概不發貨

     3、可開發票，詳情請咨詢客服

40A射頻探頭 ?測試頻率直流到40GHZ ?輸入衰減小于0.8db ?反射損耗大于18 db ?腳間距可以從50到2540微米 ?測試重復性優于-80db

Model 40A-configuration - pitch - mounting style

Configuration: Specify GSG, GS or SG for tip placement where S is the signal tip and G is a ground tip. Use the following diagram to determine the appropriate configuration.  Pitch: Specify ground (G) to signal (S) tip spacing in Microns from 50 to 1250 microns. For standard GSG probes, the two spacings are equal. Contact the factory for spacings larger than 1250 microns or unusual tip placement and spacings.

Mounting Style: Choose from thirteen adapter styles. Specify T, C, GR, P, DP, EDP, LP, Q, F, S, DS, VP, or RVP. Choose the appropriate mounting type for your application. The P, DP, EDP, LP, Q, S, DS, VP, and RVP styles have the connector pointing back at a 45 degree angle to give more working area above the probe. The DP, EDP, DS, VP, and RVP styles are used where extra clearance beneath the probe is needed. When using DP, EDP, and DS style probes, probe positioning is more difficult due to the increased probing angle since the probe points slide further forward for a given change in the Z axis than our other style probes. Custom mounting styles are available 

Example:A 40A-GSG-150-P is a Model 40A with Ground, Signal, Ground configuration with 150 microns between each contact mounted in a P style adaptor.