買家須知：
&sp;
1.所標價格為參考價，為節省時間，將同類產品同一標題列出，但價格并非統一，拍下前請聯系賣家。（注：店內產品均稅，可開普票，開票需加稅金）。另有大量庫存沒有上傳，如果您還沒有查到您想要的型號，請與我們聯系，我們可以為您研發制作偏冷門的電子元件！
&sp;
2.電子元件是型的產品，技術含量較高，由于本身可能存在著多種品牌，后輟與封裝，所以可能導致參數與性能的差異，有不慎，很有可能導致元件購買錯誤(此種失誤，非質量問題！)，為了更好的解決您的問題，請您在購買我們元件前，將您所需產品的品牌、封裝、腳位及后綴告訴我們！以便我們能準確的發貨。為了保障您的利益，切勿直接拍下并付款?。?！
&sp;
3.為避免運輸過程中造成貨物損壞或丟失給您帶來損失，請您在收到貨物時認真檢查，如有問題請勿簽收！時間與我取得聯系，共同解決問題。勿在簽收后提出數量不足，貨不對板的情況，謝謝合作！
&sp;DCRIPTION&sp; 高分貝電磁無源貼片蜂鳴器3V D-050020頂發 福鼎描述
A. SCOPE&sp;
This specification appli magnetic buzzer,&sp;D-050020F-03040N
B. SPECIFICATION
| . | Item | Unit | Specification | Condition |
1 | Oscillation Frequency | Hz | 4000 | Vo-p=1/2duty , square wave |
2 | Operating Voltage | Vo-p | 2 ~ 4 | |
3 | Rated Voltage | Vo-p | 3 | |
4 | Current Consumption | mA | MAX. 110 | at Rated Voltage |
5 | Sound Prsure Level | dB | MIN. 75 | at 10cm at Rated Voltage |
6 | Coil Ristance | Ω | 12±3 | |
7 | Operating Temperature | ℃ | -20 ~ +70 | |
8 | Storage Temperature | ℃ | -30 ~ +80 | |
9 | Dimension | mm | 5.0 x 5.0 x H2.0 | See appearance drawing |
10 | Weight (MAX) | gram | 0.1 | |
11 | Housing Material | LCP( Black ) | ||
12 | Leading Pin | &sp;Tin Plated Br(Sn) | See appearance drawing | |
13 | Environmental&sp;&sp; | &sp;RoHS |
&sp;
C. APPEARANCE DRAWING&sp;&sp;
&sp;
Tol : ± 0.3&sp;&sp;&sp;&sp;&sp; Unit: mm
&sp;
D.TTING METHOD&sp;&sp;&sp;&sp;
Standard Measurement conditions
Temperature:25±2℃&sp; Humidity:45-65%
Acoustic Characteristics:
The oscillation frequency, current consumption and sound prsure are measured by the&sp;
measuring instruments shown below
&sp;
In the measuring tt, buzzer is placed as follows:
&sp;&sp;
E. Tical Frequency Rponse Curve
&sp;
F.&sp;Recommend Driving Circuit&sp;
&sp;
The base current Ib should high eugh so that it saturat the collector current of the transistor with the CB load.
&sp;
G.&sp;Soldering Condition
(1)Recommendable reflow soldering condition is as follows
(Reflow soldering is twice)
te:It is requted that reflow soldering should be executed after heat of product go down to rmal.
&sp;&sp;Heat ristant line
(Used when heat ristant reliability tt is performed)
(2)Manual soldering
&sp;&sp;&sp;Manual soldering temperature 350 ℃ within 5 sec.
&sp;
H.&sp;RELIABILITY&sp;TT
. | ITEM | TT CONDITION AND REQUIREMENT |
1 | High Temperature | After being placed in a chamber with 80 |
2 | Low Temperature | After being Placed in a chamber with -30 |
3 | Humidity Tt | After being Placed in a chamber with 90-95% R.H. at 40 |
4 | Temperature Cycle | The part shall be subjected to 5 cycl. One cycle shall be consist of: |
5 | Drop Tt | Drop on a hard wood board of 4cm thick, any directions ,6 tim, at the height of 75cm . |
6 | Vibration Tt | After being applied vibration of amplitude of 1.5mm with 10 to 55 Hz band of vibration frequency to each of 3 perpendicular directions for 2 hours . |
7 | Solderability | Lead terminals are immersed in rosin for 5 seconds and then immersed in solder bath of +300 |
8 | Terminal Strength | The force of 9.8N(1.0kg) is applied to each terminal in axial direction for 10 seconds. |
TT CONDITION.&sp;
Standard Tt Condition&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp; :&sp;&sp;&sp;&sp;&sp; a) Temperature : +5 ~ +35℃&sp; b) Humidity : 45-85% &sp;&sp;&sp;&sp;&sp;&sp; c) Prsure : 860-1060mbar&sp;
Judgment Tt Condition&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp;&sp; :&sp;&sp;&sp;&sp;&sp; a) Temperature : +25 ± 2℃&sp;&sp; b) Humidity : 60-70%&sp;&sp;&sp;&sp;&sp;&sp;&sp; &sp;c) Prsure : 860-1060mbar
I. PACKING STANDARD
江陰市福鼎通訊器材有限公司成立于1994年，生產各類蜂鳴器，喇叭，咪頭產品。公司在蜂鳴器及訊響器件的領域已有20多年的經驗，擁有完整、科學的質量管理體系，以及的自動化設備。
&sp;
公司年產蜂鳴器過5000萬個，其中貼片蜂鳴器銷量過2000萬片，過一半的貼片蜂鳴器被廣泛應用于高端可穿戴設備及移動消費類電子中，在同行業。
&sp;
為了產品的質量和性，我們擁有專門的管理和強大的研發團隊。目前公司有將近20000平方米的現代化廠房，300多名員工，技術開發人員20多人。我們已經和來自香港、臺灣、日本、韓國、加拿大，美國以及其他的客戶建立長期的合作關系。
&sp;
&sp;
