振動組合探頭油位：-10-40mm 油溫0-100℃ 振動：0-20mm/s 安徽萬瓏電氣

安徽萬瓏電氣YG252-4R2-1D0-20mm/s 15米引線一體化振動變送器 HZD-B-X(220V)振動變送器 HZD-B-9A(24V)振動變送器 HZD-B-9A國產振動變送器 HZD-B-9A(220V)振動變送器 XH-VS SDJ-705LLX0-20mm/S一體化振動探頭,JK7330A03—90—10,0—20mm,電渦流式,0.5%物料名稱:振動變送器 物料規格:0-20mm/s 4-20mA 0.5%振動變送器\二線制一體化振動變送器測量范圍0-25mm/s輸出電流 4-20mA工作電壓DC24V接線方式二線制詳見技術規范書三參數組合探頭(一體化溫度振動油位).振動/速度/加速度傳感器;KR939SB3 測量范圍:0-100度;應用場合:風機;物料附加信息軸承振動傳感器VT9299H-951-422-00 0-25.4mm/s延長電纜330130-045-00-CN振動探頭VT9218H-151-X12-1000H位移探頭GJ258-880,振動量程:0-20mm/s 輸出4-20mA三參數組合探頭,吸附式振動探頭測試/測量儀器附件;振動探頭/EN080/0-20mm/s 測量范圍:0-20MM/S安徽萬瓏電氣振動/速度/加速度傳感器;型號規格:KR-939SB 振動:0-20mm/s,油位:-10-40mm,油溫:0-100℃, ;測量范圍:振動:0-20mm/s,油位:-10-40mm,油溫:0-100℃,;工作溫度:0-100℃;X振動：0-20mm/s 輸出：4-20mA Y振動：0-20mm/s 輸出：4-20mA Z振動：0-20mm/s 輸出：4-20mA 溫度：0-100℃ 輸出：4-20mA 安裝七資：螺紋連接 螺紋長度30mm 螺紋規技：M27*2mm 測量杠長度：200mm 探頭引線長度10米SDJ-706Y\30mv/mm/s三參數組合探頭油位:-10-40mm 油溫:0-100℃ 震動:0-20mm/s防爆電子振動開關HZD-B-3-A1-B2-C1-D1,HZD-B-III-A1-B2-C1-D1一體化軸振動變送器HZD-Z-6A-A2-B1-C2-D1振動探頭VS-2X-A04-B06-C02測量方向水平垂直軸向一體化振動傳感器量程0-25mm/s振動裝置WT0150-A08-B14-C37-D10位移探頭P/N ZH30103-A00-B10-C10-D01-E00 SN:1S1807振動/速度/加速度傳感器;型號規格:DZ3700-02-04 準確度:<2%;防護/防爆等級:IP65;測量范圍:±1mm;工作溫度:-30℃-120℃;工作電壓:DC24V;輸出信號:電壓信號;響應時間:1ms;物料附加信息靈敏度20m/s,頻率:5-1000Hz,垂直安裝,航空插頭兩線制出線。位置/位移傳感器;型號規格：8000C/CGW-HS5709(探頭型號:8125-01-A06-B03-C02-D01-E10 電纜型號:8200-A80-D01 前置器:8300-A25-B90);材質:聚苯硫醚(PPS) 準確度:0.8V/mm;核準:/;電源接頭類型:/;防護/防爆等級:IP65;外殼材質:1Cr18Ni9Ti;測量電纜細節:/;測量范圍:9mm,-7.08V;安裝類型/方式:垂直;公稱行程:/;工作溫度:/;工作電壓:24Vdc;輸出信號:電壓信號;類型:DWQZ;物料附加信息:8000C/CGW-HS5709(探頭型號:8125-01-A06-B03-C02-D01-E10 電纜型號:8200-A80-D01 前置器:8300-A25-B90)全套,DWQZ, Φ25振動/速度/加速度傳感器;型號規格:PCZ-9200 20mV/mm/s 準確度:20mV/mm/s;防護/防爆等級:IP65;測量范圍:0-0.2MM;工作溫度:-30℃~120℃;工作電壓:24V;輸出信號:20mV/mm/s;物料附加信息0~360度,20mV/mm/s(帶接頭及8米延伸電纜)安徽萬瓏電氣振動：0-20mm/s 輸出：4-20mA 溫度：0-100℃ 輸出：4-20mA 液位：-10-40mm 輸出：4-20mA 安裝七資：螺紋連接 螺紋長度30mm 螺紋規技：M27*2mm 測量杠長度：200mm 探頭引線長度10米振動/速度/加速度傳感器;型號規格:SZ-6G,SLDF181安徽萬瓏電氣

冷卻塔風機安全監控系統中，一種非總線結構的通用型組合探頭。它可以直接與風機安全監控器"配接，實現單臺設備監控。也可以與多種通用二次儀表，或計算機數據采集測控系統（DCS、PLC等）連接使用一體化組合探頭為不銹鋼全封閉防水結構，探頭是以外螺紋形式，安裝于風機減速箱的螺紋安裝孔中，探桿插入減速箱內，從而獲取減速箱中潤滑油溫度、潤滑油油位和箱體振動信號，完成變送輸

three parameter combination (oil level temperature vibration combination) probe is a general type combined probe that is used in cooling tower fan safety monitoring system. It can be connected with a variety of general two instruments, or computer data acquisition and control system (DCS, PLC, etc.).

This is applied to the fan gear box combined probe for safe operation of monitoring, in its internal integrated measuring temperature, oil level, vibration signal sensing, conversion and transmission circuit of direct output and the security parameters corresponding to the 4 ~ 20mA standard current signal, can be matched with a variety of general-purpose two meter or      computer digital acquisition monitoring system.

The probe temperature measurement with platinum resistance sensor and semiconductor integrated device; level measurement using a capacitive sensing principle; sensor for measuring      vibration, mechanical vibration acceleration signal acquisition, band-pass filter, an integral and true effective value through the amplifier (RMS) converter, the vibration waveform in the effective bandwidth of it effective value conversion; finally, the oil temperature, vibration generated by the 4 ~ 20mA output.

• Temperature measurement characteristics;

Measurement range of lubricating oil temperature：0～100 ℃ ，Compreh

-ensive error of temperature measurement：±1℃

• Oil level measurement characteristics:

Measurement range of lube oil level：0～50㎜（10 mm for the gear box under normal oil level oil limit position）, Maximum error of oil level measurement： <= ±1㎜

Ambient temperature from -40 to 65 C（Extreme temperature resistance from -50 to 150 C）

• Vibration measurement characteristics：

    Range of vibration measurement：0～20 ㎜/s ，The measurement output is proportional to the effective value of the vibration velocity (RMS). Frequency range of vibration measurement: 10～1000HZ, Maximum error of vibration measurement: <=±1㎜/s

• Signal output characteristics;

Active current type output：DC/4～20mA ，Requirements for passive resistive load。Maximum load resistance：< 300 Ohm

• Supply characteristics of power supply：

working voltage：DC/24V±4V，Maximum protection voltage：DC/30V ，Rated current：DC/80mA, Maximum instantaneous working current：120mA，Internal voltage Ambient temperature range：－20～80℃，Ambient humidity range：0～100％（The port is sealed with 704 silicone rubber seals）

• Electrical connections：

 Two four bit terminals：+24V power supply、GND、It 、t-COM、Io、o-COM、Iv、v-COM：It temperature current signal output；Io oil level current signal output；Iv vibration current signal output：The typical connection refer to the schematic diagram of the connection principle of the probe