| 品牌 | 德國WTW | 型號 | PhotoFlex |
| 類型 | 多參數水質分析儀 | 測量范圍 | COD,總硬度,硫化物,重金屬 |
| 測量精度 | ±0.01ph | 電源電壓 | 6V |
| 分辨率 | ±2nm | 用途 | 實驗室、工廠化驗室、污水廠 |
PhotoLab S6 PhotoLab S12
優點:
◆操作簡單
◆AQA功能
◆攜帶方便
◆MemoChip存貯芯片,升級簡單
◆濁度修正
◆6/12個干涉濾光片,光電管陣列技術
◆PhotoLab S12具有50種用戶自定義方法
簡易操作:
◆PhotoLab 系列是專為操作舒適及簡單的例行測試而設計,廣泛應用在工業過程及污水分析中。開發的光路系統不含移動件,消除了機械磨損,配有的電子線路。當用戶打開翻蓋后,儀器自動開機,檢測光路系統。翻蓋不僅有保護作用,上面還有簡明操作指南,方便查閱。大尺寸LCD顯示內容布局合理,清晰明了,而且在操作中還可顯示操作向?qū)А?br />AutoSelect自動選定:
◆AutoSelect意味著用戶不必去擔心采用何種測試方法,只要插入標準試劑管,儀器便自動選擇相應的測試方法,測試完成后,自動顯示測試結果。
MemoChip存貯芯片:
◆MemoChip使儀器升級非常容易,升級時只要引入MemoChip,打開儀器,PhotoLab S6立刻把新的測試方法地貯存在它的指令系統中,從而不必更換EPROM。
PhotoLab S12特有功能:
◆數字鍵盤使用戶可以方便地更改設定值以及設定標識號
◆Autoselector自動選擇器用來自動選擇用戶自定義的測試方法
◆方形比色皿,規格10,20,50mm
技術參數:
◆型號:PhotoLab S6/s12
◆類別:光度計
◆波段:6個/12個
◆準確度:±2 nm
◆半寬:10 nm
◆自動調零:YES
◆AutoSelect:YES
◆自動確認比色管:YES
◆比色管:圓柱形/圓柱形;方形10,20,50mm
◆數據存貯:500組,帶日期時間/1000組,帶日期時間
◆接口:RS232
◆電池操作狀況:一天,放電保護,用變壓器作電源時自動充電
◆日期/時間:內置實時鐘
儀器介紹 德國WTW的COD測定儀,快速COD測定,操作簡單的COD測定儀,攜帶方便的COD測定儀,此型號COD測定儀是暢銷型,COD測定儀……
COD測定儀 自動光度計 PhotoLab S6
可測參數:COD,總硬度,硫化物,重金屬(鉻,鎘,NH4-N,鈣,鐵,鎂,鋁,氯,氟,銅,硝酸鹽,亞硝酸鹽,總氮,磷酸鹽,鋅,碘,臭氧,鉛,鎳,鉀,硅,硒)
特點:
操作簡單
AQA功能
攜帶方便
波長精確度±2nm
MemoChip存貯芯片,升級簡單
濁度修正
6個干涉濾光片,光電二極管陣列技術
適合在實驗室、工廠化驗室、污水廠中作水質分析及測試COD
可測試多種參數
PhotoLabS6專為操作舒適及簡單的例行測試而設計,廣泛應用在工業過程及污水分析中
。開發的光路系統不含移動件,消除了機械磨損,配有的電子線路。當用戶打開翻
蓋后,儀器自動開機,檢測光路系統,翻蓋不僅有保護作用,上面還有簡明操作指南,方便
查閱。大尺寸LCD顯示內容布局合理,清晰明了,而且在操作中還可顯示操作向?qū)А?/p>
AutoSelect自動選定
AutoSelect意味著用戶不必去擔心采用何種測試方法,只要插入標準試劑管,儀器便自
動選擇相應的測試方法,測試完成后,自動顯示測試結果。
MemoChip存貯芯片
MemoChip使儀器升級非常容易,升級時只要引入MemoChip,打開儀器,PhotoLabS6立刻把
新的測試方法地貯存在它的指令系統中,從而不必更換EPROM。
WTW是歐洲的環保儀器制造商。成立于1945年,總部位于德國慕尼黑市郊,具有60多年的制造先進物化分析儀器的成功經驗。產品技術處于水平,廣泛應用于科研、質量控制、水質分析、污水治理等行業,是世界上主要的環保分析儀器和在線監測儀器的生產廠商。如果您沒有找到需要的德國WTW產品,請撥免費熱線400-7006595聯系我們的銷售工程師
This page informs about WTW’s proceeding with respect to EC directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) , implemented into German law by the “Gesetz über das Inverkehrbringen, die Rücknahme und die umweltverträgliche Entsorgung von Elektro- und Elektronikgeräten ( Elektro- und Elektronikgerätegesetz – ElektroG )“.
The statements made below on the disposal of no longer used WTW instruments apply bindingly only for customers inside Germany. Customers in other EC countries should contact their local distributor and/or their local authorities for correspondent information.
One primary goal of the WEEE directive is to minimise the disposal of WEEE as unsorted municipal waste and to achieve a high level of separate collection and recovery of WEEE.
As a company committed to the protection of the environment WTW supports this goal expressly.
WEEE may contain materials that are harmful to the environment and the human health and should by no means be disposed of together with the municipal waste.
Proper disposal of WTW instruments taken finally out of use
Can WEEE originating from WTW be handed over to the communal collection points for WEEE ?
The answer is expressly no for the following reason:
WTW instruments are designed for professional use and accordingly they have been approved as b2b (business to business) products by the competent german authority Stiftung EAR ( Elektro-Altgeräte Register) , where WTW is registered under WEEE-Reg.-Nr. 35575700. The b2b classifiaction implies that WTW does not have to pick up WEEE at the communal collection points as the ElektroG demands it from the producers of consumer EEE, and consequently our products are excluded from this path of disposal.
Instead we offer our domestic customers to take back no longer used WTW instruments produced from 2006 on and properly dispose them free of charge.
This complies with the announcement of EAR that the producer’s obligation of disposal in the case of b2b becomes effective for instruments supplied after 23.03.2006.
The year of production can be identified from the first two figures of the serial number labeled on the instrument, e.g. 06… for 2006.
Instruments for disposal must be sent in with prepaid postage and marked with "ZUR ENTSORGUNG".
As a voluntary service to our customers we also take back instruments from before 2006 free of charge, if a new instrument with comparable function is purchased.
In other cases we reserve the right, to charge a cost-covering disposal fee.