一:功能FUNCTIONS:
1.噴油泵調速特性曲線動態快覽。（Quick view the characteristic curve of governor with dynamic.)
2.測量不同轉速時的齒桿行程。（Measurement of rack travel at any speed.)
3.測量不同轉速時的各缸供油量（Measurement ofeach cylinder delivery at any speed.)
4.靜態檢查各缸供油時間（Checking of each cylinder injection timing with static.)
5.對噴油泵進行密封性試驗（Checking of the sealing injection pump body.)
6.檢查機械調速器性能。（Checking of the mechanical governor.)
7.檢查氣動調速氣性能。（Checking of he pneumatic governor.)
8.檢查氣膜調速器負壓性能（Checking of the vacuum capacity of governor.)
9.檢查壓力補償器性能（Checking of the mainifold pressure compensators(LDA))
10.測量分配泵泵體內壓。（Measurement of the internal pressure of distributor pump body.）
11.分配泵益流量測量（Measurement of the reflux delivery of distributor pump body.）
12.分配泵電磁閥試驗（Testing of the electromagnetic valve of distributor pump.)
13.檢查輸油泵（Checking of transfer pump.)
14.檢查提前器性能（Ckecking of the advance angle of advance device.)
二.特點CHARACTERISTIC
1.噴油泵調速特性曲線動態快覽（Quick view the characteristic curve of governor with dynamic.)
2.工業控制計算機——一體工作站測量控制（Control and measrue by industrial computer work station.)
3.高分辯率、真彩色液晶屏顯（High definition ,LCD display.)
4.調速方式、隨心所欲。手動調速、數字調速、程序化檔轉速預置
（ways to adjust speed ,hand , digital ,pro-grammed steps preset.)
5.可建立噴油泵數據庫，并可以利用該數據庫直接控制試驗臺運行。（You can set up database of pump and
use it control test bench.)
6.可錄制、繪制、調用調速特性曲線圖。(It can record,createand load a curve of governor.
7.可建立速調特性曲線圖。(You can set up database of governors curve.)
8.測試曲線與標準曲線對比。（You can compare the test curve with the standard curve of governor.)
9.可生成噴油泵測試。（You can get a test report of a tested pump.)
10.標準打印機接口（Standard port of printer.)
11.上網（可選）。(Connect to internet(on request))
12.各項功能有計算機軟件控制，（Every function is done by computer and software.）
三.參數PARAMETERS
1 輸出功率（Output power）:7.5KW,11KW,15KW
2 輸出電源（Electronical supply）:三相（3-Phase)380V/50HZ(或根據要求or on request)
3.中心高（Interaxe height):125mm
4.量筒(Graduates):45CC,150CC
5.燃油箱容積（Volume of fuel tank):60L
6.提供直流電源（DC.Supply):12/24v
7.供油壓力（Feeding fuel pressure）:低壓（Low）:0-0.4Mpa 高壓（High）:0-4Mpa
8.調速范圍（Range of speed）:+/-4000RPM
9.齒桿測量范圍(Range of rack):0-25mm
10.氣壓（Air pressure):-50 +300Kpa）
11.油溫自動控制(Control fuel temerature):40+/-2度