拉矯機
   本設備選用了連續矯直型的拉矯機，其主要作用是拉坯并對圓弧形的鑄坯連續矯正成直鑄坯。拉矯機傳動系統的電機采用變頻電機，通過變頻裝置，電機可在較大范圍內改變轉速，適應不同拉速的需要。工作時，拉矯機必須克服拉坯過程中結晶器內的摩擦力、二冷裝置阻力、矯直阻力等。因為影響拉坯速度的因素很多，所以必須根據不同的情況調整拉坯速度。驅動引錠桿時，調高拉矯機的傳動速度。上驅動輥與脫錠輥的上升和下壓動作采用冶金液壓缸，具有運動平穩的特點。油缸的工作壓力4－8 Mpa；拉矯機輥身具有耐磨性好的優點。

Withdrawal Straightener 
  The continuous casting machine employes continuous straightening type withdrawal straightener, which continuously straightens the arc-shape billets. The withdrawal straightener is driven by AC frequency conversion motor, which allows a large-range speed regulation. In the casting process, the withdrawal straightener has to overcome the friction force from the crystallizer and resistance from the secondary cooling device. There are a number of factors affecting the casting speed, and the casting speed has to be adjusted according to different situations. When driving the dummy bar, the worker should increase the speed of the withdrawal straightener. The ascent and downward pressing move of the upward driven roller and billet-off roller respectively are managed through the hydraulic cylinder. The working pressure of the oil cylinder is 4-8Mpa. The rollers of the withdrawal straightener has the advantage of wearproofness.

本設備選用了連續矯直型的拉矯機，其主要作用是拉坯并對圓弧形的鑄坯連續矯正成直鑄坯。拉矯機傳動系統的電機采用變頻電機，通過變頻裝置，電機可在較大范圍內改變轉速，適應不同拉速的需要。上驅動輥與脫錠輥的上升和下壓動作采用冶金液壓缸，具有運動平穩的特點。油缸的工作壓力4－8 Mpa；拉矯機輥身具有耐磨性好的優點。