電子秤 液晶屏手提式電子秤 40KG 便攜稱 手提電子稱
手提式電子稱 手提稱 電子稱 稱重40KG
概述：
手提電子秤以嵌入式微電腦為，稱量準確，性能穩定。大屏幕背光LCD數字顯示屏，數字顯示清晰。具有去皮、保留、多種單位轉換和自動關機等功能。適用于家庭稱量，外出購物、戶外活動，是理想的新一代稱量器具。
開機：
將電子秤懸掛，使其處于豎直狀態，按“ON/OFF”鍵開機，顯示器全顯示88888約兩秒鐘后顯示0.00kg（或0.00lb或0.0oz），此時手提秤完成初始化，進入稱重狀態。
去皮/置：
當使用容器裝散裝物品稱重時，可先將容器掛于秤鉤上，按“TARE”鍵歸后裝入物品稱重，就可得到物品的凈重。
保留功能：
稱重時讀數穩定后，電子秤自動對物品的重量保留，并在重量讀數的左邊帶有“HOLD”的顯示，再加重時不會有變化，可按“ON/OFF”鍵解除保持狀態。
稱重：
開機后掛上物品，即可顯示秤上物品重量，當秤上掛物品穩定（停止搖擺）后，物品的重量值被保持，并顯示鎖定的標志（HOLD）。此時可按“ON/OFF”鍵解除。稱重時，所加物品重量（包括皮重）不得過稱量40kg，如果過以上值時，將顯示載標志“0－Ld”，并發出報警聲。
單位轉換：
按“UNIT”鍵，電子秤在市斤、kg（公斤）、lb（磅）、oz（安士）四個單位之間進行循環轉換（1kg=2.2lb=35.3oz）。
關機：
稱重狀態下（在初始化下不能關機），沒有鎖定時按“ON/OFF”鍵關機；在鎖定狀態時先按“ON/OFF”鍵解鎖，再按“ON/OFF”鍵關機，或在60秒內操作電子秤自動關機。
注意事項：
1、每次開機自檢時，電子秤處于垂直方向。
2、請手提著環或在環上另加輔助工具稱量，請勿手提外殼稱量，否則將導致稱量顯示誤差標。
3、在使用中應盡量避免猛烈碰撞和沖擊。
4、手提電子秤外殼采用ABS工程塑料，清潔時請使用軟布加清水或洗潔精擦拭，嚴禁使用苯、硝基類溶劑、燒堿液體等蝕性物質進行清洗。
5、若顯示電量不足標志（LO），請及時更換電池。如果電子秤長期不使用，應取出電池，以免因電池漏液而損壞電路。
6、如出現非人為故障，請送回本公司或者本公司指定的維修點維修，不要隨意拆卸。
Instruction of the Protable Electronic Scale
Description:
Portable Electronic Scale base on application embedded microcomponent core.With accurate weight.functional stable and dial LCD display etc.Additinally,it include lots of features,Tate/Net weight is standard;professional accuracy;Zero(tare)frature;Show weight in kg;lb;oz and automatic power-off.It icellent scale of family/shopping and easy to carry.
Power on:
Put the scale at vertical position without weight in hook.Press "ON/OFF" key.The screen will display "88888".wait for 2-3seconds until the 0.00kg(or 0.00lb or 0.0oz)on the screen the scale will be ready for weight.
Tare/zero:
Put the container on hook when weighing bulk goods.Press"TARE"key,and the screen will display "0.00 or 0.000".The scale is ready for weighing.
Put the goods to the container.The screen will display the weight of the goods only after finishing.
Weighting:
Hook in the goods after the scale is ready.Weight data will be auto lock and"HOLD"sign appearing on the screen.Press "ON/OFF" key again to weight new objects.
Max weight shall mot exceed full load.The screen will display "O-Ld" and the buzzer will waun when it is overloading.
Unit selection:
Press "UNIT" key to select the unit.The unit could be selectable among kg,lb,oz,(1kg=2.2lb=35.3oz).
Power off:
Press "ON/OFF" key to turn off under weighing(without "HOLD")mode.
Press "ON/OFF" key to clear the "HOLD" sign,and press "ON/OFF" key again to turn off under the "HOLD" mode.
The electronic scale will auto turn off in 60 seconds if there is operation.
Caution:
1.vertical position required for turn on or selftest.
2.to keep weight accuracy and protest the scale please hold the stationary ring straight or add some additional tools on the stationary rings when weighing.Don't hold the plastic casing when weighing.
3.avoid any strong shock or vibration during operation.
4.use clear water and wash detergent for clearing don t use the corrosive liquid(such as ad benzene,nitrate solvent,caustic soap etc) to clear the case of the scale since it is made by ABS plastic.
5.when the screen appears the sign "battery",it means the batteries are exhausted and need be replaced.remov the batteries to avoid leakage and damage to the circuits if the scal is mot used for a long time.
6.do t disembly the scale yourself in case the product needs to be repair please contact our agent for istant
