CIP610系列隔離探頭業界款DC-200MHz隔離探頭
簡介
CIP610系列隔離探頭由一個緣的無源探頭和一個寬帶隔離放大器組成，輸入端和輸出端之間電氣隔離或稱緣,帶寬從DC到200MHz，動態范圍從1mV到1.5kV，額定隔離耐壓600V CATIII/1000V CATII，它是隔離、浮地和差分測試的通用型探頭。
產品性能
DC-200MHz寬帶線性隔離技術，輸入與輸出電氣隔離
額定浮地測量電壓600V CATIII/1000V CATII
輸入端與輸出端緣電阻大于2000兆歐
帶寬DC-200MHz，上升時間小于1.8ns
寬動態范圍，從1mV到1.5kV
靈活的衰減或放大選擇，從1/1000到x1，x5
高共模抑制比，適合高壓開關脈沖測量
輸入側為緣改良的傳統無源探頭，合使用習慣
輸出側可連接任何示波器
內置鋰電池
應用領域
開關電源、變頻器、UPS不間斷電源行業
太陽能、風電變流器行業
LED燈、路燈、燈照明行業
高校電力電子、電機實驗與科研
工業現場測試調試
汽車電子系統測試
電力設備行業
型號與規格
型號 | CIP605 | CIP610 | CIP620 |
帶寬 | 50MHz | 100MHz | 200MHz |
上升時間 | <7ns | <3.5ns | <1.8ns |
隔離耐壓 | AC 3000Vrms/1min，額定600V CATIII / 1000V CATII | ||
測量范圍 | 1.0mV – 1.5kV | ||
放大或衰減檔位 | x5*，x1* ，1/2，1/10，1/20，1/100，1/200，1/1000 | ||
輸出信號幅值 | 0～&plun;1.5V | ||
輸入阻 | 10MΩ/9pF (當采用10x無源探頭) | ||
輸出阻 | 50Ω | ||
其他功能 | AC/DC開關，量程報警，電池電壓低/充電指示燈 | ||
輸入探頭長度 | 1500mm | ||
輸出電纜長度 | 300mm | ||
隔離放大器盒尺寸 | 130mmx46mmx28mm | ||
隔離放大器盒重量 | 電池110g ，帶電池200g | ||
工作電源 | DC 5V–9V，500mA | ||
充電電源 | DC 9V , 800mA | ||
電池 | 7.4V/2200Mah鋰電池 |
*需配合1:1無源探頭實現
CIP610 serial Isolation Probe
The first DC-200MHz Isolation Probe in the Industry
INTRODUION
CIP610 serial isolation probe is composed of an insulation-enhanced pive safety probe and a wideband isolation amplifier. It’s totally elerical isolated between its input and output. The bandwidth is from DC to 200MHz, its dynamic range is from 1mV to 1.5kV, rated for 600V CATIII/1000V CATII floating tt. CIP610 serial is a universal tool for isolating tt, floating tt and differential tt.
FEATUR
Patented DC-200MHz wideband linear isolation technology, elerical isolated between input and output,
Insulation voltage 3000V/1min,Rated for 600V CATIII/1000V CATII
Wide dynamic range, from 1mV to 1.5kV
Flexible attenuation or gain seleion, from 1/1000 to x5
High CMRR, suitable for high voltage pulse measurement
The input is an insulation-enhanced pive probe, suits user's convenience.
Compatible for any oscilloscope
APPILICATIONS
Floating Measurements
PS, UPS, Motor driver Dign
Photovoltaic, Wind turbine Inverters Dign
LED Lamp, Road Lamp, CFL Dign
Eleronic and Elerical engineering Education
Automotive Dign and Tt
Power equipment dign and tt
SPECIFICATIONS
Model | CIP605 | CIP610 | CIP620 |
Bandwidth | 50MHz | 100MHz | 200MHz |
Rising Time | <7ns | <3.5ns | <1.8ns |
Isolation Voltage | AC 3000Vrms/1min , Rated for 600V CATIII / 1000V CATII | ||
Input Dynamic Range | 1.0mV – 1.5kV | ||
Gain/Attenuation | x5*，x1*，1/2，1/10，1/20，1/100，1/200，1/1000 | ||
Output Voltage | 0～&plun;1.5V | ||
Input Impedance | 10MΩ/9pF (for 10x probe) | ||
Output Impedance | 50Ω | ||
Other Funions | AC/DC Switch，Over Range Alarm，Battery Low/Charge Indicator | ||
Input Leads Length | 1500mm | ||
Output Cable Length | 300mm | ||
Size of the Isolation Amp | 130mmx46mmx28mm | ||
Weight of the Isolation Amp | 110g(without battery)，200g(with battery) | ||
Power Supply for Operation | DC 5V–9V，500mA | ||
Power Supply for Charge | DC 9V , 800mA | ||
Battery | 7.4V/2200Mah Lithium battery |
* Using 1x probe
