1、輸入特性（INPUT CHARAERISTICS）： 

  1.1輸入電壓(Input Voltage): 

    額定電壓(minal Voltage):100-240Vac 

    調整范圍（Variation Range）:90-264Vac 

1.2輸入頻率（Input Frequency）: 

  額定頻率（minal Frequency）:50/60Hz 

    調整頻率（Variation Frequency）:47-63Hz 

1.3輸入電流(Input Current): 

當輸入交流電壓為額定值的下,輸出電壓負載滿載，輸入交流電流0.5A。 

0.5Arms max At any input voltage and rated, DC output rated load. 

2、輸出特性（OUTPUT CHARAERISTICS）： 

2.1輸出功率(Power Output); 

    電壓             充電電流范圍      峰值電流            輸出功率 

    Voltage        Min.Load         Max.Load           Output Power 

  + 12V               1.0A              1.5A                  12W

2.2負載特性/調整率(Combined Load/Line Regulation): 

    電壓           小空載電壓   空載電壓  線性調整    負載調整     

  +12V             12V               12.6V           3%         &plun;5%  

2.3效率(Efficiency): 

    當輸入100Vac和輸出負載時,小80%。 

     80%Min.At 100Vac input and output Max. Load. 

    當輸入240Vac和輸出負載時，小85%。 

     85%Min.At 240Vac input and output Max. Load.

3、保護功能(PROTEION REQUIREMENT): 

3.1短路電路保護: 

    Short Circuit Proteion: 

    該電源供給器在短路解除時,能恢復正常工作。 

The power supply will be auto recovered when short circuit faults remove. 

3.2過流保護(Over current Proteion)： 

過流故障排除后，電源將自動恢復正常工作。 

     The power supply will be auto recovered when over current faults remove. 

3.3過壓保護(Over Voltage Proteion) 

    當輸出電壓過額定電壓時,電源將保護,故障排除后能恢復正常工作。 

The power supply will t be auto recovered when faults remove

4、及EMC要求(SAFETY AND EMC REQUIREMENT): 

4.1標準: 

              合CCC.      

4.2高壓(DIELERIC STRENGTH)：（測試方法按下面接線圖） 

()Primary to secondary)：3000Vac/5mA/60s.

5、結構參數(MECHANICAL REQUIREMENT)： 

5.1外殼(Enclosure): 

  外殼尺寸:L78 *W44*H29mm 

     The power supply size L: L78 *W44*H29mm