903 3合1吸錫拆焊

903 3in1 Vacuum Gun Rework Station

==特 式 / FEATURE ==

1)維修設計, 包括BGA拆焊手柄, SMD吸錫及靜電烙鐵三功能組合, 使維修工作更得心應手。
1) Overall funional design included BGA rework handle, vacuum gun and antistatic soldering iron.

2) 利用非接觸式拆焊技術, 使線路板免受損壞。
2) Adopted non-touch rework technique avoids damage of circuit board.

3) 吸錫升溫快, 吸力強, 除錫干凈徹底, 屬國內。
3) Vacuum gun has quick heat and strong vacuum power for high efficient tin remove. It is originate in China.

4) 熱透明過濾管, 吸錫量一目了然。
4) Anti-heat clear filter tube is easy to check tin volume.

5) 吸錫及24V低壓烙鐵輸出為靜電設計, 保護線路板。
5) Antistatic vacuum gun and 24V soldering iron have good proteion of PCB.

6) 靜電恒溫烙鐵采用發熱芯及烙鐵咀, 壽命更長。
6) Antistatic thermostat soldering iron used imported heater and tips for longer life.

7) 開關鍵, 可三人同時分享功能使用。
7) Individual starts could be shared funions by 3 users.

8) 一機多用設計可節省成本及空間。
8) All in one design saves the cost and space.

9) 易攜手柄方便移動。
9) Carry handle is convenient to move.

== 903 ==

/穩定功率: 熱風420W/300W; 吸錫150W; 烙鐵60W/30W
Max/Steady Power: Hot Handle 420W/300W; Vacuum Gun 150W; Soldering Iron 60W/30W
控溫范圍: 熱風100~500 oC; 吸錫380~480 oC; 烙鐵200~480 oC
Temperature: Hot Handle 100~500 oC; Vacuum Gun 380~480 oC; Soldering Iron 200~480 oC
恒溫: PID +/-1 oC
Thermostat: PID +/-1 oC
發熱芯: 熱風250W陶瓷; 吸錫24V 70W陶瓷; 烙鐵24V 50W陶瓷
Heater: Hot Handle 250W Ceramic; Vacuum Gun 24V 70W Ceramic; Soldering Iron 24V 50W Ceramic
氣泵: 45W膜片
Air Pump: 45W Diaphragm
真空吸力: 600mmHg
Vacuum Power: 600mmHg
真空氣流: 15公升/分鐘
Vacuum Airflow: 15 L/min
氣流量: 0.3~24公升/分鐘
Airflow: 0.3~24 L/min
接地電阻: <2Ω
Ground Resistance: <2Ω
接地電壓: <2mv
Ground Potential: <2mv
機身: 185(長)245(闊)170(高)毫米
Dimension: 185(L)245(W)170(H) mm
包裝: 33.5x28x19厘米
Packing: 33.5x28x19 cm
毛重: 5.6千克
Gross weight: 5.6 kg