LED driver LED-mD-1c generates symmetrical unipolar meander (quasi-continuous mode). This mode provides maximum average optical power from the LED. Signal data (such as amplitude, repetition rate and pulse duration) remains steady while the input voltage may vary from 5 to 6 voltage.

Technical parameters
Input voltage range                               +5 ÷ +6 V, stabilized
Power consumption (Wattage)               Less than 4 watt
Board dimensions (without LED), mm    24×12
Weight                                                  5 g
Signal data
Repetition rate (Frequency)                   1 kHz
Pulse duration                                       500 μs
Output current amplitude                       150 mA

This power supply is for indoor use only.
Please mount or diount this unit in power-off state. If
the unit were mounted or diounted in power-on state, it
can be cause of breakdown.
This unit is not damp-proof or dust-proof.
This power supply is for indoor use only.
Please mount or diount this unit in power-off state. If
the unit were mounted or diounted in power-on state, it
can be cause of breakdown.
This unit is not damp-proof or dust-proof.
This power supply is for indoor use only.
Please mount or diount this unit in power-off state. If
the unit were mounted or diounted in power-on state, it
can be cause of breakdown.
This unit is not damp-proof or dust-proof.
This power supply is for indoor use only.
Please mount or diount this unit in power-off state. If
the unit were mounted or diounted in power-on state, it
can be cause of breakdown.
This unit is not damp-proof or dust-proof.
This power supply is for indoor use only.
Please mount or diount this unit in power-off state. If
the unit were mounted or diounted in power-on state, it
can be cause of breakdown.
This unit is not damp-proof or dust-proof.
This power supply is for indoor use only.
Please mount or diount this unit in power-off state. If
the unit were mounted or diounted in power-on state, it
can be cause of breakdown.
This unit is not damp-proof or dust-proof.
This power supply is for indoor use only.
Please mount or diount this unit in power-off state. If
the unit were mounted or diounted in power-on state, it
can be cause of breakdown.
This unit is not damp-proof or dust-proof.