產 品 規 格 書
PRODU SPECIFICATION
【1】適用范圍 SCOPE
本規格書適用于：0.5間距柔性扁平電纜
This specification covers the 0.5mm Pitch FPC/FFC Conneors（series Locking）
【2】產品名稱及型號 PRODU NAME AND PART NUER
產品名稱Produ Name | 產品型號Part Nuer |
FFC/FPC扁平電纜 |
|
|
|
【3】定格 RATINGS
項目 Item | 規 格 Requirement | ||
容許電壓 Rated Voltage(MAX) | 50V | [AC/DC(值 Virtual value)50Hz] | |
容許電流 Rated Current(MAX) | 0.4A | ||
使用溫度范圍 Aienttemperature Range | -25℃～ +85℃ | ||
【4】性能 PERFORMANCE
4.1電氣性能 Elerical Performance
項目Item | 條 件 Test Condition | 規格Requirement | |
4.1.1 | 接觸電阻 Conta Resistance | 適合FPC/FFC嵌合；開放電壓20mV以下；短路電流10mA的狀態下測定。 Mate applicable FPC/FFC and measure by dry circuit，20mV MAX，10mA. | ≤20 mΩMAX |
4.1.2 |
緣電阻 Insulation Resistance | 適合FPC/FFC嵌合；相鄰端子間或端子與地面間加DC 500V下測定。 Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MΩMIN |
4.1.3 |
耐電壓 Dieleric | 適合FPC/FFC嵌合；相鄰端子間或端子與地面間加AC 200V（值）歷時1分鐘下測定。 Mate applicable FPC/FFC and apply 200V AC（virtual value）for 1minute between adjacent terminal or ground. | 無擊穿現象 No Breakdown |
4.2機械性能 Mechanical Performance
項目Item | 條 件 Test Condition | 規格Requirement | |
4.2.1 | 鎖緊力及拔出力 Locking and Withdrawal Force | 適合0.3mm厚的FFC；用每分鐘25&plun;3mm的速度；平行地、鎖緊、拔出。 Insert and extra applicable FFC at the speed rate of 25&plun;3mm/minute. | 鎖緊力Locking 1.96*n (N) MAX 拔出力Withdrawal 0.49*n (N) MIN |
4.2.2 | 端子保持力 Terminal /Housing Retention Force | 以用每分鐘25&plun;3mm的速度平行向外拉 Pull the terminal at the speed rate of 25&plun;3mm per minute | 3.92N MIN |
4.3環境和其他性能 Environmental Performance and Others
項目Item | 條 件 Test Condition | 規格Requirement | ||
4.3.1 | 重復插拔 Repeated Insertion and Withdrawal | 無通電狀態；以10次/分鐘的速度插拔20次 Insertion and withdrawal auator up to 20 cycles at the speed rate of less than 10 cycles/minute | 接觸 Conta Resistance | 60 mΩMAX |
4.3.2 | 溫度上升 Temperature Rise | 適合FPC/FFC嵌合；容許電流通電，溫度測定。（UL 498） Carrying rated current load.（UL 498） | 溫度上升 Temperature Rise | 30℃MAX |
