PLH250高精度線性直流電源

英國TTi PLH120/PLH250高精度線性直流電源

TTi PLH系列高性能線性直流穩壓電源

它是基于低電壓精度的線性電源新的PL系列（提供高達60V）具有相同的套管式和類似的輸出功率。然而，某些功能的高電壓的相關是不同的。

PLH系列的真正的模擬控制，結合新的數字為基礎的方便的特點。

產品特點：

• 為便于使用真實的模擬控制
• S -鎖功能立即鎖定設置
• 為減少不確定性的計量精度
• 平均的低電流范圍，電流表
• 直流輸出開關和“視圖限制”按鈕
• 為了獲得性能的線性調節
• 超緊湊的設計，使用更少的空間
• 比其他線性供應更高的能源效率
• 安全接線柱連接端子

產品型號/規格：

• PLH120 - 0 to 120V at 0 to 750mA
• PLH250 - 0 to 250V at 0 to 375mA
  Lower Voltage Models - Go Here for New PL and PL-P Series

PL068 - 0 to 6V at 0.to 8A
PL155 - 0 to 15V at 0 to 5A
PL303 - 0 to 30V at 0 to 3A
PL601 -  0 to 60V at 0 to 1.5A
PL303QMD - 2 x (0 to 30V at 0 to 3A)
PL303QMT - 2 x (0 to 30V at 0 to 3A) plus 0 to 6V at 0.to 8A

OUTPUT SPECIFICATIONS

Voltage/Current Levels

PLH120 - 0 to 120V / 0.01mA to 750mA (90W max.)
PLH250 - 0 to 250V / 0.01mA to 375mA (94W max.)
Note: Actual maxima for voltage and current are typically 1% greater than the figures given above
except for the voltage control on the PLH250 which is limited to 250.0V.

Output Setting & Control

Voltage Setting: By coarse and fine controls.
Current Setting: By single logarithmic control.
Low Current Range: Reduces max. current to 75mA and increases resolution to 0.01mA.

Output Mode: Constant voltage or constant current with automatic cross-over.
CC indicator lit in constant current mode.

Output Switch: Electronic, non isolating. Preset voltage and current limit displayed when Output is off.
Output rise time no load <20ms.

View Settings: With the output On, the meters show actual voltage and current.
The preset levels can be viewed and adjusted at any time by pressing the View Settings button.

V-Span (Voltage Span Control)

The voltage adjustment range can be controlled by digital setting of the end-stop values of
the coarse voltage control to any desired values. The range for Vmax is 1V to 120V or 250V depending on